Presto NextGen® Polyaspartic Floor Coating Lasts 400% Longer & Cures 12 Times Faster Than Epoxy.
Want to fix your ugly, unsafe, cracked garage floor? Presto NextGen® 4-Hour Garage Flooring can transform it into a stunning showpiece in just 4 hours!
Our special concrete-coating system blows traditional epoxy floor coatings out of the water. From a 400% longer lifespan to a 12-times faster curing time, Presto NextGen Garage Floors are the convenient, peace-of-mind garage floor solution.
Our “Special Sauce” is an exclusive polyaspartic formula. It not only outlasts epoxies, but polyurethanes and other polyaspartics as well. It’s THE garage floor solution for homeowners who want maximum value for their investment.
Chemical and liquid spills can stain and corrode epoxy coatings. Presto NextGen is made with special polyaspartic, a hybrid compound that resists stains and corrosion from chemicals. This leaves your garage floor looking fabulous… no matter what gets poured, dumped, or dropped on it.
The superior nature of our polyaspartic prevents scratching, chipping, yellowing, and fading. And since it’s twice as thick as epoxy, it can withstand heavy foot traffic and high-impact force for 400% longer.
When you pull into your garage, your tires are hot from driving. This heat can cause epoxy coatings to lift away from the floor. Presto NextGen is impervious to hot-tire pickup… making our garage-floor coatings suitable for, you know, actual garages.
Presto NextGen Garage Floors stay looking glossy and like-new with only a periodic dry sweep and wet mop with a mild detergent as needed. No labor-intensive cleaning. No costly maintenance. No stripping, waxing, or polishing. Period.
To ensure proper adhesion and curing, epoxy coatings have to be installed in temperatures between 50⁰F to 80⁰F. NextGen can be installed properly in near 0⁰F temperatures!
While epoxy can potentially worsen your garage’s air quality, polyaspartic is free from volatile organic compounds (VOC). Polyaspartics are virtually odorless and contribute toward satisfying credits for LEED (Leadership in Energy & Environmental Design).
Our floor applicators are trained, vetted, and skilled employees. To ensure the smoothest finish, they take the time to fix any cracks or uneven spots in the concrete before NextGen installation.
Epoxy coatings require about 48 hours before it can be walked on and at least 5 days before you can drive on it. NextGen Flooring is installed within 4 hours, can be walked on in 6 hours, and driven on in 24 hours!
Here’s Our Process…
Yes, It’s That EASY!
There are numerous types of garage floorings available, with epoxy being applied like paint and serving as a garage floor sealer. While epoxy does have some advantages, such as a relatively low cost and it can be a more effective choice than other types of garage floor coverings, there are also disadvantages that may cause someone to decide it’s not worth it to epoxy their garage floor. These include the intense floor prep involved, which can even include an acid wash under some circumstances; the length of time it takes before you can use your garage again (figure two days before walking on it and five or more days before driving on an epoxy floor); and the fact that epoxy isn’t always as long-lasting as, say, putting down tiles or a rolled-out garage floor covering.
Our take: epoxy is better than some options but not as worthwhile as a polyaspartic floor coating, such as our Presto NextGen® Flooring.